Kabel Power Adapter 4Pin IDE to 15 Pin Serial SATA Untuk Hardisk

  • Rp 7.000
IDR 7000
  • Availability: In Stock
Quantity

Kabel Power Adapter 4Pin IDE to 15 Pin Serial SATA Untuk Hardisk

Transfer a 4Pin Power Connector to SATA Female power connector
Easy to install and easy to use
Simple connect the 4pin Male Connector to a 4pin Female SATA connector which is supplied by your computer power adapter
Introduction
Serial
ATA power cables are usually 4 or 5-pin cables with 15-pin connectors.
SATA power cables currently use IDE/ATAPI to SATA power adapters.
One
end of the SATA power cable is a typical 4-pin IDE/ATAPI power
connector (which gets connected to an unused power cable from the power
supply) and the other end (15-pin connector) is connected to the SATA
hard drive.

Features:
Transfer a 4Pin Power Connector to SATA Female power connector.
Suitable for 3.5 Inches SATA Hard Disk and 3.5 Inches SATA CD-ROM; DVD-ROM; DVD-R/W; CD-R/W and so on.
Easy to install and easy to use.
Simple connect the 4pin Male Connector to a 4pin Female SATA connector which is supplied by your computer power adapter.
Compliant with Serial ATA 1.0 Standards.
Shielded cable to protect against EMI/RFI.
Length: 20cm
Connector A: 4 pin male
Connector B: 15 pin Sata female